1set Clock Mechanism Parts Classic Hanging DIY Black Quartz Watch Silent Wall Movement repair with needles | Дом и сад

Package Included:

1 x Quartz clock movement

1 x Second hand

1 x Minute hand

1 x Hour hand

1 x Nut

1 x Metal Washer

Installation method

First, gently press the hour hand,

Reloading the minute hand and second hand slowly pressing from right to left

Pay special attention to the fact that the pointer must be aligned at 12 o'clock

So that the time accuracy rate is relatively high.

Keep the pointer above and below the parallel distance. Do not rub it.

Special Note: The long pointer is the minute hand, the short is the hour hand, don't get it wrong.

Do not use alkaline batteries. The use of alkaline batteries for the movement is not good.

Suspend using high-energy batteries such as Nanfu Speedmaster.

The best use of carbon battery is the ordinary battery.)

Conversion : 1 inch = 25.4mm or 1mm = 0.0393 inch,1cm=10mm

Notice:

1. Please allow 1-3mm error due to manual measurement.

2. Please make sure you do not mind before you bid.

3. The colors may have different as the difference display, please understand.

Notification:

1 The pointers are made of thin aluminum or iron plate after one time punch, although the packaging is good, but still can not avoid being bent during long-distance transportation. If it occurs the situation, please slightly smooth it straight by fingers. It doesn\'t affect usage.

2 The installation of pointers is skillful. Three needles should be installed separately and do not overlap as much as possible. Otherwise it will affect the performance that these pointers may not walk. Please read the notes carefully before your purchase.